Expressions Vinyl Puff 9" x 12" Heat Transfer Sheet
As the name implies, EV Puff is a unique HTV that “puffs” up from the garment when heat applied, transforming designs into a textured 3D look.
Note: EV Puff is designed to withstand only one heat application. Repeated applications will “flatten” the puff effect permanently. It is recommended to apply EV Puff last when used with other materials.
- Application: Preheat 3 seconds - Apply MED-FIRM pressure at 280°F for 15-18 seconds
- Peel: Warm
- Layering: Top Layer Only
- Adheres to: 100% Cotton, 100% Polyester, Cotton/Poly Blends
- Finish: Matte
- Thickness: 200 mircrons / 7.87 Mils
- Recommended Wash Instructions: Wait 24hrs before 1st wash - Machine wash warm/cold - Tumble dry on normal setting - Do not bleach or dry clean - Wash inside out
- Compatible with all craft cutters such as: Cricut, Silhouette, Xyron, Craft ROBO, Graphtec, Quickutz, Inspirations, Pazzles, etc.
- Available in 9"x12" sheets ***All sizes are +/- 0.25"***
Tips & Tricks
• Use a stronger grip cutting mat or you may need to attach to mat with tape.
• Frosted carrier side down to cut. Shiny side (adhesive side) face up.
• Do not repress, will loose “puff” if pressed additional times.
• As with any vinyl, ALWAYS do a test cut first to make sure your settings are on point.